Clone Mac Hard Drive To Ssd With Bootcamp

Clone Mac Hard Drive To Ssd With Bootcamp

Clone Mac Hard Drive To Ssd With Bootcamp Windows 10
Clone Mac Hard Drive To Ssd With Bootcamp Software
Dec 09, 2020 Generally, it is recommended to clone the hard drive of your Mac in case you decide to upgrade the hard drive with a solid state drive (SSD), replace an old or corrupted drive with a new one or if you are going to create a bootable hard drive. How to change photo resolution on mac. In most cases, all these demands can be achieved with the help of cloning.
You can save an image of your Boot Camp partition and then restore the image, or you can use the Volume-to-Volume feature of Winclone 9 to copy your existing Boot Camp partition to external hardware. We recommend USB-C or Thunderbolt external SSD drives, a modern Mac, and Windows 10 for best performance and compatibility.
Step 6: Quit Boot Camp Assistant. Format your external drive in macOS. Step 1: Connect your external SSD to your Mac via USB and use Finder to ensure that there's nothing on it that you need.
Stellar Drive Clone software is now macOS High Sierra compatible. It also supports macOS Sierra 10.12, 10.11, 10.10, 10.9, 10.8, 10.7 & 10.6. Below are some of its salient features:
Clones complete macOS High Sierra hard disk drive
Creates disk images (.dmgs) of macOS High Sierra, SSDs, Volumes
Creates macOS High Sierra bootable USB and Minimal system
Clone Mac volumes and encrypted hard drives
Restores cloned data from a folder
Supports HFS, FAT, EXFAT and NTFS-EXFAT cloning
Features1) Clones Macintosh HD – Stellar Drive Clone for macOS High Sierra clones or create a mirror image of startup disk i.e. Macintosh HD to an another hard drive. It also clones macOS Sierra Solid-State-Drives (SSD), Volumes to another Volumes and Network Drives.
2) Disk Imaging Mac nw22 powder. – This macOS High Sierra clone software creates a disk image or .dmg file of a volume (partitions), attached external hard drives, solid state drives. Select ‘Source' drive and provide a ‘Destination' to start the disk imaging process.
3) Restores a Cloned Volume – Using Stellar Drive Clone application, you can restore a cloned volume back to a folder just by selecting the source (cloned folder) and a destination to which the data of the folder will be restored to.
4) Creates a Rescue USB – With Stellar Drive Clone for macOS High Sierra 10.13, you can easily make a bootable working copy of your Macintosh HD (startup disk). You can add your preferred applications and start your Mac with the rescue USB whenever required.

Clone mac hard drive to ssd with bootcamp software

5) Schedule your Backup – This unique feature of the Stellar Drive Clone software helps user to backup macOS High Sierra data and even schedule a complete backup of macOS High Sierra data to a safe location.
Back in the early days of AAAD, our late-2009 iMac was the center of our connected home. It held all of our photos, our iTunes library, and our documents. 
We replaced the late-2009 iMac with a 27' retina iMac a few years ago. My dad took the old iMac and used it in his office. 
Last week, he let me know that the iMac was having issues, and that he'd bring it to me to check it out.
No Apple logo, no cursor, no pinwheel.. not even a bomb icon. 
I'd never repaired an iMac before. Was it worth trying to fix this one?
Clone Mac Hard Drive To Ssd With Bootcamp Windows 10
Clone Mac Hard Drive To Ssd With Bootcamp SoftwareRepair vs. Trade-InThis was a pretty easy decision. The Official Apple Trade-In Value for a 2009-era iMac is $0. They'll recycle it for you, but that's it.
I had a pretty strong hunch that the internal hard drive had finally died. 
It was an old SATA drive, and after 11 years, that's the most likely point of failure. 
A 250 GB SSD with SATA connectors would cost $28.99 at Amazon.. Wait. $28.99? The price of SSDs has apparently dropped quite a bit. 

At that price, it seemed silly NOT to attempt the repair. 
Opening the iMaciMacs have a reputation for being difficult to open. After all, the screen covers up all of the internal components. 
I'd assumed that the glass screen was glued down - but it's not, it's held in place with strong magnets.
Getting the glass screen off was simple - just pull the glass up a little but with your fingernails, slide a credit card in there, and pry it up. 
Then, you have to get past the actual LED screen. This involves removing a number of small screws - very straightforward. 
However.. the screen is attached to the CPU in multiple places. Less than straightforward. Best practice would be to disconnect the LED screen entirely.. but the hard drive was right there... I could probably do this without removing the screen.
I got a couple of pint paint cans to prop up the screen, and got to work.

Replacing the Hard DriveThe hard drive in a 2009-era iMac is held in place with a steel bracket across the top. Remove that bracket. 
It has a standard SATA connector - simply unplug the old drive and plug in the SSD.
There's one additional plug from the old drive, that will NOT fit into your SSD. That's the temperature/fan control. We'll get to that later. 
The SSD is much smaller than a 3.5' hard drive, and can't be held in place with the old bracket.
You can purchase a SSD iMac adapter bracket.. but you don't really have to.
Fortunately, it's tiny and weighs almost nothing. It can be secured in place with a piece of Velcro (available at Home Depot.)
NOTE - I forgot to format the SSD, which caused a ton of extra work at the end. When you're installing the SSD, make sure you've already formatted it. (ATFS format, GUID Partition Map scheme.)

Booting UpI closed up the iMac, basically doing the disassembly steps in reverse, plugged in the iMac, and booted it up.
Nothing - obviously, there's no operating system. 
I tried to boot up in Recovery Mode (using a USB keyboard.. the Magic Keyboard wasn't communicating with the iMac, because Bluetooth wasn't online in 'White Screen of Death' mode.)
Nothing. 
This SSD wasn't going to be able to download macOS. 
I was going to have to try to make a USB boot disk. 

Making a USB Boot DiskBut.. it's still not that easy. This is an old Mac! It can't run Catalina. It can't run Mojave. Apple confirmed that High Sierra was the final supported OS for Late-2009 iMacs. 
Back to the Retina iMac, to make a High Sierra boot disk on a USB stick. 
I was able to download a copy of High Sierra from the macOS App Store, using a link I found here. 
Making a boot disk is a LITTLE tricky - it requires the use of Terminal and the Disk Utility - but the procedure is straightforward, and it's set out very well, right here.
Once I had my High Sierra USB drive ready to go, I plugged it into the 2009 iMac and tried to boot in Target Mode. 

After some trial and error, the High Sierra boot disk worked!


(Of course, the iMac couldn't see the SSD until I formatted and re-installed it.)

You Can Do This. For $30, we took a worthless iMac, and created.. well, an almost-worthless 11-year-old iMac with a low-res screen, but one that is running a little faster because it's an SSD now!


One final note - remember how we weren't able to connect that Temperature / Fan Control plug to the SSD? 
I just secured it inside the iMac when I closed it up, which means that the fan was running at 100% all the time. 
To get around that problem, download 'SSD Fan Control', which will key the fan speed to the CPU usage. It's a pretty seamless workaround. 
What's Next?Our next 'Mac Salvage' effort will be a 2011-era MacBook Pro, which had a swollen battery actually warp the case. 
The battery was removed and safely disposed - and who are we to let a crisis go to waste?
New battery, max out the RAM, swap the HDD for an SSD.. should be a pretty solid MacBook Pro! 